Barium Stearate

Barium Stearate Introduction Barium Stearate is a long-term heat stabilizer with both lubricant functions, no sulfurization pollution, and good initial colorability when used alone. Formula:(C17H35COO)2Ba CAS NO.6865-35-6   Properties Item index Barium content % 19.3-20.7 Free acid (in terms of stearic acid)% ≤0.8 Heating reduction (moisture)% ≤0.5 Melting point °C ≥205 Fineness(0.075mm sieve)% 99.5%  …

Magnesium Stearate

Magnesium Stearate Introduction Magnesium Stearate can be used as a stabilizer for plastic products, a powder molding agent for tablets, a catalyst for paint and a calming agent, and a raw material for cosmetic flour. There is basically no harm to the human body. Molecular Formula: Physical and chemical properties: this product is a white light…

Zinc Stearate

Zinc Stearate Introduction Zinc Stearate is widely used as a release agent in different plastics like PVC, PP, PE. Used in petrochemical and also plastic compounding. It is widely used in CSB as well. Formula: C36H70O4Zn CAS NO.:557-05-1 synonyms: Zinc Stearate SW Baerlocher, Calcium Stearate TW FACI Properties Product Name Zinc Stearate Model Petrochemical Grade…

Calcium Stearate

Calcium Stearate Introduction Calcium Stearate is widely used as an acid absorbent and lubricant in different plastics like PVC, PP, PE. Used in petrochemical also plastic compounding. It is widely used in CSB as well. Formula: C36H70CaO4 CAS NO.:1592-23-0 synonyms: CEASIT SW/PA Baerlocher, Calcium Stearate SW/DW/WLC FACI Properties Product Name Calcium Stearate Grade Petrochemical Grade…

BX PPA 5920

Polymer Processing Aids (PPA) 5920   PPA Introduction Polymer Processing Aids are free-flowing additives made of modified fluoro-elastomer which improve the processing of polyolefin resin at very low levels of usage. BX Polymer Processing Aids are coated at the inside of the die wall and decrease the friction between melted resin and the die wall.…

BX PPA 5924

Polymer Processing Aids (PPA) 5924   PPA Introduction Polymer Processing Aids are free-flowing additives made of modified fluoro-elastomer which improve the processing of polyolefin resin at very low levels of usage. BX Polymer Processing Aids are coated at the inside of the die wall and decrease the friction between melted resin and the die wall.…

BX PPA 5922

Polymer Processing Aids (PPA) 5922   PPA Introduction Polymer Processing Aids are free-flowing additives made of modified fluoro-elastomer which improve the processing of polyolefin resin at very low levels of usage. BX Polymer Processing Aids are coated at the inside of the die wall and decrease the friction between melted resin and the die wall.…

BX PPA 5911

Polymer Processing Aids (PPA) 5911   PPA Introduction Polymer Processing Aids are free-flowing additives made of modified fluoro-elastomer which improve the processing of polyolefin resin at very low levels of usage. BX Polymer Processing Aids are coated at the inside of the die wall and decrease the friction between melted resin and the die wall.…

Oleamide

Oleamide Introduction – Oleamide Slip Agent Usage Oleamide’s relative density is around 0.9 and its flash point is 210°C. It does not dissolve in water, but it has considerable solubility in organic solvents including ketone, ester, benzene and turpentine, and slightly solves in an organic solvent including ethanol and ether, and has good intermiscibility with…

erucamide

Erucamide Introduction – Erucamide Slip Usage Erucamide is waxy solid. Its molecular structure contains one unsaturated double bond, which has a long carbon chain and polar acylamino. It does not dissolve in water, but it has certain solubility in organic solvents including ketone, ester, alcohol, ether, and benzene, good intermiscibility with resin, as well as…