Flame Retardant for PP Plastic FR PP V0 NA

Introduction:

Flame Retardant for PP plastic FR PP V0 NA is a halogen-free environment-friendly LSHF flame retardant with N and P, a non-APP-based FR system. FR PP V0 NA has higher thermal stability and decomposition temperature. FR PP V0 NAB is more suitable for TPE, PE, and XLPE wires and cables because it contains higher phosphorus content than FR PP V0 NA.

 

Test past:

-UL94 V0 (0.75mm)

–70℃×168hrs water-immersion (UL746C)

–GWIT 750℃

–GWFI 960℃

–free from the restrictions of RoHS Directive 2002/95/EC approved by the EU and the Council. Besides, wires and cables with FR PP V0 NAB can reach the standard of UL1581 VW-1.

 

Advantage:

Low density, Lower smoke generation, Less mold corrosion. Polyolefin with FR PP V0 NA does have not the phenomenon of the water-sliding surface during extrusion, and sieves can be added during the process.

 

Applications:

Flame Retardant for PP plastic is widely used in PP, PP with GF, TPE, PE, XLPE wires and cables.

 

Specifications:

ItemsUnitFR PP V0 NAFR PP V0 NAB
AppearanceWhite PowderWhite Powder
Densityg/cm31.8±0.21.8±0.2
Phosphorous Content%19.5-21.523.0-25.0
Nitrogen Content%19.0-21.018.0-20.0
Water%0.5 max0.5 max
Water Solubilityg/100ml0.1 max0.1 max
PH4-54-5
Average Particle Size(D50)μm1010
Decomposition Temperature270 min270 min

 

Recommended Dosage:

ResinProductDosageTest result
UL94 V-0VW-1GWIT
PPFR PP V0 NA20%1.5mmGWIT 750℃(3.0mm);

GWFI 960℃(3.0mm)

PPFR PP V0 NA32%0.75mm
PP+10%GFFR PP V0 NAB25%1.5mm
PP+20%GFFR PP V0 NAB25%1.5mm
PP+25%GFFR PP V0 NAB30%1.5mm
LDPEFR PP V0 NA30%1.5mm
HDPEFR PP V0 NA30%1.5mm
TPE

(PP/SEBS)

FR PP V0 NA35%3.0mmNot for general use
FR PP V0 NA38%3.0mmFor general use

Package and Storage:

20kgs or 25kgs kraft bag with double PE inner. By customer’s requirements. Handle with care, keep air-tight and dry.