Silicon Slip/Anti-block Agent – BX Silicone PP MB

BX Silicone PP MB introduction

BX Silicone PP MB is silicone and olefin copolymerization that has good compatibility with polyolefin materials. When being used in polyolefin film, it imparts the molding surface an excellent slippery effect just in a small amount. With no exudation, BX Silicone PP MB can solve the problems such as pollution and transfer because of migration and exudation, effect change with time and temperature, which is caused by traditional silicone, erucamide, and oleic acid amide, oleamide.


BX Silicone PP MB Specifications

Appearance: white pellets
MFR( 230 ℃ ×2.16kg) : 12g/10min
Density: approx. 0.92g/cm 3
Grain size: approx. 3.0mm
Heat loss(300 ℃ ) : 1.0% max


BX Silicone PP MB Application

Due to Slip Agent Masterbatch’s standard particle form and the same grain size as polyolefin, it is suitable for direct extrusion, biaxial stretching, casting, and blown film molding after mixing and dispersing evenly with the particles of polyolefin. When being used in three co-extruded BOPP or PE films, it can be directly added to the heat-sealing layer to decrease the static and dynamic COF of the film surface thus improving processing speed and stable quality. It has long-lasting slip performance without odor, exudation and influence on printing.
BX Silicone PP MB can be used with all known additives. The recommended addition in the polyolefin film is as follows:

Polymer Dosage (%)
PE 1.0 ~ 5.0
PP 2.0 ~ 7.0

Slip Agent Masterbatch Food Contact

BX Silicone PP MB can be used as the food contact additive. The polyolefin part of BX Silicone PP MB is compliant with article 177.1520(c)3 of the FDA and the siloxane part is compliant with article 181.28 of FDA.

Slip Agent Masterbatch Packaging and Transportation

The standard packaging is PE bag, the nwt weight is 25kg/bag, 500kg/pallet. Packaging and transportation is in accordance with international laws and regulations.


BX Silicone PP MB is suggested to be stored in a dry and cool place. It will be valid for two years. Please seal up after each opening to avoid dampness.


Safety and Operation

For detailed information of safe storage, usage, and operation of BX Silicone PP MB, please refer to the MSDS. Before accepting this product, you should read over the information in MSDS carefully.