Flame Retardant for fabric coating BX FR FC Introduction: Flame Retardant BX FR FC mainly contains N and P, is a kind of halogen-free and eco-friendly flame retardant. It was developed especially for fabric coating (polyamide/polyurethane/acrylic-based）. FR FC V0 takes effect by the mechanism of char formation and gas phase flame retarding. Specifications: Appearance White…
waterborne HALS BX UV 123W Introduction BX UV 123W is a non-basic hindered amine light stabilizer (HALS). It has been designed for waterborne systems and is especially suitable for polyurethane (PUD) and alkyd dispersions where basic uv stabilizers such as BX UV 1130 and BX UV 292 is not applicable. Physical Properties: pH: 6~8 Viscosity:…
water-based UV BX UV 400W Introduction BX UV 400W is an emulsion of a hydroxyphenyl triazine (HPT) UV absorber for waterborne coatings and paint. It is recommended where the most common waterborne UV Stabilizers, BX UV 1130 and BX UV 292 is not applicable, such as for coating material that carries acidic catalysts, transition metal ions,…
water-based antioxidant BX AO 245W Introduction: AO 245W is a new type of antioxidant emulsion high-efficiency, environmentally friendly terminator produced by our company. It has very good compatibility with PVC macromolecules, so it has excellent anti-migration and anti-extraction properties. In addition, since it is an asymmetric hindered phenol structure, it will not form a quinone-like…
Permanent antistatic for nylon BX ATA P200 Product Information Permanent antistatic additives generate a conductive network during compounding/processing, then discharge through the pathway. baoxu permanent antistatic is made of thermoplastic polyamide elastomer blends(TPAE), similar to Poly Ether Block Amide(PEBA). Antistatic agent BX ATA P200 is heat-resistant at about 280℃, and can be used for antistatic…
Permanent antistatic for PP/PE/ABS BX ATA P100 Product Information Permanent antistatic additives generate a conductive network during compounding/processing, then discharge through the pathway. baoxu permanent antistatic is made of thermoplastic polyamide elastomer blends(TPAE), similar to Poly Ether Block Amide(PEBA). Antistatic agent BX ATA P100 can be used for antistatic packaging, electronic products, etc.; This product…
BX Laser 832P laser additive for PC Introduction BX Laser 832P is a laser marking additive for polycarbonate plastics, to mark black color on transparent PC plastics, typical dosage 1-2%. Typical applications are for the electrical and electronics industry in which transparency of PC is needed. Specifications: Appearance: dark grey granules Density ~1.3 g/cm3…
BX Laser 732 laser additive for colored plastic Introduction BX Laser 732 is a UV laser marking additive for various colored plastics, to mark black color on colored plastics, typical dosage 1-2%. Typical applications is for the electrical and electronics industry, colored wire & cables. Specifications: Appearance: white granules Density ~1.3 g/cm3 Carrier PE…
BX Laser 733S laser additive for ABS Introduction BX Laser 733S is a laser marking additive for ABS plastic, to mark white color on black color ABS plastics, typical dosage 1-2%. When using this laser engraving additive, there is no need to use any black masterbatch anymore. Specifications: Appearance: black granules Density ~1.3 g/cm3…
BX Laser 733B laser additive for PP Introduction BX Laser 733B is a laser marking additive for polypropylene plastic, to mark white color on black PP plastics, typical dosage 1-2%. When using this laser engraving additive, there is no need to use any black masterbatch anymore. Specifications: Appearance: black granules Density ~1.3 g/cm3 Carrier…
