Biocide MBS 5050
Introduction
Biocide MBS 5050 has excellent bactericidal properties. The combined use of MIT and BIT produced a synergistic effect on a range of microorganisms, which resulted in a reduction in the total amount of fungicide used compared to the use of one compound alone. Additionally, the bactericidal profiles of the two actives are complementary. Some species that require relatively high concentrations of BIT to be successfully controlled can be effectively controlled with relatively low concentrations of MIT. This effect can also be reflected in overcoming the weakness of MIT in controlling mold. All in all, Anticide MBS 5050 is the best dosage. Therefore biocide MBS 5050 has a broad-spectrum bactericidal action against bacteria, fungi, and yeasts. In particular, it has particularly excellent resistance to Pseudomonas spp.
Properties & Specification:
Chemical composition: water-based formulation of 2-Methyl-4-isothiazolin-3-one (MIT) and 1,2-Benzisothiazol-3(2H)-one(BIT)
Cas 2634-33-5, 2682-20-4
Appearance: yellow to amber liquid
Smell: mild
Density (20℃): 1.0-1.1g/cm³
MIT content: 4.70-5.30%
BIT content: 4.70-5.30%
pH (20℃): 8.0-10
Solubility: easily soluble in water, most low molecular weight alcohols, and ethylene glycol
Application
Biocide MBS 5050 can be used to protect waterborne products such as latex paints, polymer emulsions, adhesives, enamels, fillers, sealants, etc. from harmful microorganisms when wet. Especially suitable for products with high pH value and environmentally friendly formulations. The recommended concentration is 0.10-0.20%, depending on the product being applied and the environmental conditions in which it will be used.
TDS/ MSDS
Biocide MBS 5050 tds baoxu chemical
Biocide MBS 5050 MSDS baoxu chemical
Sample and Inquiry
Please contact our online sales or mail at [email protected] for a sample and general inquiries.