synthetic Hydrotalcite

Synthetic Hydrotalcite BX DHT Introduction: BX DHT is a kind of aluminum and magnesium hydroxide, and it’s a status of ultramicro powder and has good dispersibility in processing. BX DHT is mainly used as an acid absorber in polyolefin processing. It has the appearance of white powder and is insoluble in water. Equal to Kyowa…

BX AO PUR 67

Irgastab AO PUR 67 Introduction PUR 67 is a novel liquid heat stabilizer blend for polyether and polyester-based flexible foams. It is a BHT-free blend containing a low amount of aminic antioxidants. used to replace BASF Irgastab PUR 67.   Application: PUR 67 is particularly suitable for the stabilization of polyols used for the manufacturer…

BX AO 1411

Antioxidant Irganox B1411 & B1412 Introduction Antioxidant B1411 & B1412 are a blend of antioxidant 3114 and antioxidant 168 Specification: Appearance:     white powderAsh:       0.10 % maxLoss on drying:       0.50 % max Transmittance(10g in 100 ml toluene) at 425 nm  95.0% min at 500 nm  97.0% min Melting range (℃)               183-223℃ Application Antioxidant Irganox B1411 & B1412…

BX AO FS

Antioxidant Irgastab FS Introduction Antioxidant Irgastab FS series 210/301/410/811 are blends of phenol-free antioxidants, and light stabilizers, provide outstanding processing stability to polyolefins while virtually eliminating any gas fade discoloration that may occur when phenolic systems are used. The system also provides both long-term thermal stability as well as a higher level of light stability…

BX AO H10

Antioxidant H10 Introduction Antioxidant H10 is a phosphorus-containing inorganic salt antioxidant, mainly used as nylon antioxidant, which can greatly improve the High long-term thermo-oxidative aging properties (LTTS) and resistance to yellowing.   Specification: Appearance white crystalline powder Effective content ≥ 98.8% Melting point >200℃ Volatile matter ≤ 0.20% Density 1.65g/cm³(20℃) BRUGGOLEN H10 Application Antioxidant H10…

BX AO 136

Antioxidant HP136 Introduction Antioxidant HP136 A high-efficiency carbon-free radical scavenger, combined with phenolic and phosphorous acid antioxidants has a significant effect. It is very suitable for polyolefin, polycarbonate surface PC transparent back material, polyester, high-temperature adhesives, lubricants and high-temperature processing aids of polyamide PA6 and PA66. As a carbon center free radical scavenger, this product…

BX AO DPOP

Antioxidant DPOP Properties Product Name: DPOPChemical Name: 2-Ethylhexyl diphenyl phosphateFormula: C20H27O4PMolecular Weight: 362.4CAS No.: 26401-27-4EC No.: 214-987-2 synonym Weston ODPP Specification: Appearance Colorless Transparent LiquidPhosphorus Content (%) 8.6 MINAcidity (mg, KOH/G) 0.1 MAXFlash Point (℃) 200 MINViscosity Range (Cps) 20 – 25Relative Density (25℃, g/cm³) 1.08 – 1.09 Application For PVC and synthetic resin products,…

BX AO TPPI

Antioxidant TPPI Introduction Antioxidant TPPI performs very well as an auxiliary antioxidant, flame retardant, and age resister. It is broadly used in PVC, PP, and PS industries to maintain products’ photostability. Other usages include the chelating agent and stabilizer in PVC industries. TPPI also serves as an intermediate in manufacturing trialkyl phosphite ester. Specification: Product…

BX AO B210

Antioxidant B210 Introduction Antioxidant B210 CAS NO.:   66.7% Antioxidant 168:Tris (2,4-di-tert-butylphenyl) phosphite;33.3% antioxidant -1010:Pentaerythritol Tetrakis (3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate) Specification: Appearance:     white powderSoftening point:      115℃ minAsh:       0.10 % maxLoss on drying:       0.50 % max Transmittance(10g in 100 ml toluene) at 425 nm  97.0% min at 500 nm  97.0% min Melting range (℃)                  110-186℃ Flashpoint (℃)                     >150℃ Application Antioxidant B210…

BX AO 1500

Antioxidant 1500(439) Introduction Antioxidant 1500 is a non-toxic and highly efficient phosphite antioxidant, which can improve the color and thermal stability of polymers during processing. It is mainly used in PVC products, as an auxiliary stabilizer, and can effectively improve thermal stability and transparency. In addition, it can also be used for PE, PP and…