Permanent antistatic for nylon BX ATA P200 Product Information Permanent antistatic additives generate a conductive network during compounding/processing, then discharge through the pathway. baoxu permanent antistatic is made of thermoplastic polyamide elastomer blends(TPAE), similar to Poly Ether Block Amide(PEBA). Antistatic agent BX ATA P200 is heat-resistant at about 280℃, and can be used for antistatic…
Permanent antistatic for PP/PE/ABS BX ATA P100 Product Information Permanent antistatic additives generate a conductive network during compounding/processing, then discharge through the pathway. baoxu permanent antistatic is made of thermoplastic polyamide elastomer blends(TPAE), similar to Poly Ether Block Amide(PEBA). Antistatic agent BX ATA P100 can be used for antistatic packaging, electronic products, etc.; This product…
Antistatic Glycerol Monostearate GMS90 Introduction Glycerol monostearate is a pure white powder, insoluble in water, and soluble in aliphatic alcohol, benzene, and ketone. A stable dispersed system is formed by self-emulsify when strongly shake with hot water. The HLB of Glycerol monostearate is 3.9-5.3. Formula: C21H42O4 CAS NO.:31566-31-1 synonyms: Glycerol monostearate, gms90, Glyceryl monostearate Properties…
Antistatic Hostapur SAS 93 Introduction Chemical Group: Sodium alkyl sulfate Effective component (%) : ≥95 CAS 68037-49-0 Decomposition temperature (℃) : >300 Softening point (℃) : approx.80 Melting point (℃) : approx220 Moisture content (%) : ≤ 1.0 Equivalent to: HOSTAPUR SAS 93 Appearance: Light yellow oblate pellets Product Information BX ATA 93 has low…
Antistatic Armostat 600 Introduction Chemical Group: Alkyl(C14-C18)bis(2-hydroxyethyl) amine Synonyms: Hydrogenated tallow bis(2-hydroxyethyl) amine Molecular weight : approx.352 CAS No. : 90367-28-5 Appearance, 25℃: slightly yellowish solid Flashpoint(Cleveland open cup,℃): approx. 219 Equivalent to: Armostat 600 Product Information BX ATA 600 is a tallow-based saturated alkyl bis(2-hydroxyethyl) amine. BX ATA 600 is an internal antistatic additive that…
Antistatic Armostat 400 Introduction Chemical Group: Alkyl(C12-C14)bis(2-hydroxyethyl) amine Synonyms: Cocobis(2-hydroxyethyl) amine Molecular weight : approx.288 CAS No. : 61791-31-9 Appearance: clear, almost colorless liquid Flash point(Cleveland open cup,℃) : approx. 193 Equivalent to: Armostat 400 Product Information BX ATA 400 is vegetable-based saturated-alkylbis(2-hydroxyethyl)amine of high purity and low color. It is an internal antistatic additive that…
Antistatic Armostat 300 Introduction Chemical Group: Alkyl(C14-C18)bis(2-hydroxyethyl) amine Oleyl bis(2-hydroxyethyl) amine Molecular weight : approx.350 CAS No. : 61791-44-4 Appearance, slight yellowish paste Flash point(Cleveland open cup,℃) : approx.210 Equivalent to: Armostat 300 Product Information BX ATA 300 is a tallow-based oleyl bis(2-hydroxyethyl) amine. BX ATA 300 is an internal antistatic additive that can be used…
Antistatic Armostat 1800 Introduction Chemical Group: Alkyl(C16-C18)bis(2-hydroxyethyl) amine Synonyms: Steary bis(2-hydroxyethyl) amine Molecular weight: approx.352 CAS No. : 10213-78-2 Appearance off-white waxy solid Flashpoint(Cleveland open cup,℃) : approx. 200 Equivalent to: Armostat 1800 Product Information BX ATA 1800 is vegetable-based saturated alkyl(C16~C18) bis(2-hydroxyethyl) amine. It is an internal antistatic additive that can be used in various…
Antistatic Atmer 163 Introduction Chemical Group: Ethylamine oxide Active substance content (%): ≥97 Amine value (KOHmg/g): 190±10 Volatile component (%): ≤0.5 Titration point (℃): -5-2 Equivalent to: Croda Atmer 163 Appearance: colorless transparent liquid Product Information BX ATA 163 is derived from vegetable oil, is a non-ionic internal additive antistatic agent, widely used in various polyethylene,…
Antistatic Atmer 129 Introduction Appearance（25℃）: White powder Melting point(℃): 67 Density: 575kg/m³ Equivalent to: Croda Atmer 129 Product Information BX ATA 129 is a newly developed high-activity ester antistatic agent, which has the effect of controlling static electricity. It is suitable for various thermoplastic polymers, such as polyethylene, polypropylene, soft and rigid polyvinyl chloride, and its…
