BX Laser 732 laser additive for colored plastic
Introduction
BX Laser 732 is a UV laser marking additive for various colored plastics, to mark black color on colored plastics, typical dosage 1-2%. Typical applications is for the electrical and electronics industry, colored wire & cables.
Specifications:
Appearance: white granules
Density ~1.3 g/cm3
Carrier PE resin
Features:
- no damage to the surface as compared to infrared (IR) laser marking.
- Lasting mark will not peel or scratch off, as with traditional printing solutions.
- Suitable for aerospace applications such as optical fiber or data transmission cables.
Laser Engraving Systems
Systems of the wavelength at 355can be used. Baoxu also offers laser marking additives for fiber laser systems.
Type of Laser
From a foundational standpoint, a UV laser vs a fibre laser differs greatly. UV lasers use ultraviolet light, while fibre lasers use infrared light. Additionally, the UV laser is 355 nm while the fibre laser is 1090 nm. Since they have different types of light, each laser has a separate process of marking. Fibre lasers use high heat with high output to mark materials, while UV lasers use absorption to break down bonds.
UV Laser vs Fibre Laser Applications
A UV laser does not rely on heat for marking, so it can mark heat-sensitive materials without damage. On the other hand, fibre lasers do use heat, so they do not have the capability of marking on heat-sensitive materials without damage. However, fibre lasers may be better for certain metals like iron because of the high output, creating high contrast.
Dosage
typical dosage 1-2%
Packing
Package: 25 Kg/bag
Baoxu Laser marking additive
| Grade | Appearance | Dosage | Polymers | polymer color | marking color | laser types | FDA |
| BX LASER 8208 | Grey granules | 1-2% | PP, PE, TPU, TPE, PET, POM, SEBS, TPE, ABS | white | black | Fiber laser | NO |
| BX LASER 8825 | light gray powder | 0.10% | PP, PE | white | black | Fiber laser | NO |
| BX LASER 733P | black granules | 1-2% | PA, PBT | black | white | Fiber laser | NO |
| BX LASER 8835 | black powder | 0.10% | PP, PE, TPU, TPE, PET, POM, SEBS, TPE, ABS | black | white | Fiber laser | NO |
| BX LASER 733B | black granules | 1-2% | PP | black | white | Fiber laser | NO |
| BX LASER 733U | grey granules | 1-2% | TPU | white/colored | black | Fiber laser | NO |
| BX LASER 733S | black granules | 1-2% | ABS | black | white | Fiber laser | NO |
| BX LASER 732 | white granules | 1-2% | PP, PE, TPU, TPE, PET, PBT, POM, SEBS, TPE, ABS | color | black | UV laser | NO |
| BX LAER 832P | black granules | 1-2% | PC | transparent | black | Fiber laser | NO |
| BX LAER 832S | black granules | 1-2% | ABS | transparent | black | Fiber laser | NO |
| Lasergreen 40MB | Grey granules | 1% | PC, PMMA, ABS | transparent | black | Fiber laser | YES |